. | ||
. |
The Trolleyville Schoolhouse is intended to be a repository for articles on electric railway
modeling and for recording electric railway prototype facts that can be used
for modeling purposes.
All information contained in these lessons is for individual modelers use only and is not to be used for commercial purposes.
Modelers, historians and electric railway fans who wish to place original
articles in this schoolhouse, see submission instructions below.
Room 1: Catenary and Trolley Wire Construction and Operation
Lesson 1: Hanging
Simple Overhead Wire For Trolley Pole Use (Instructor: George L.
Huckaby)
Lesson 2: Operational
Trolley Poles For HO Scale Model Electric Streetcars and Interurban
Vehicles
(Instructors: Dave Garcia & George Huckaby)
Lesson 3: Hanging Trolley Wire and Catenary in N scale (Instructor: Alex M. Pospichil)
Room 2: Track Construction & Operation
Lesson 1: Single
Point Switch Construction For Street Track (Instructor: Dave Gairo)
Lesson 2: Prototype Street
Railway Track (Instructor: Southern California Traction Club)
Lesson 3: ORR Street Railway Track - Part One - The Product
Line (Instructor: George L. Huckaby)
Lesson 4: ORR Street Railway Track - Part Two - Basic
Installation Techniques (Instructor: George L. Huckaby)
Lesson 5: ORR Street Railway Track - Part Three -
Advanced Installation Techniques (Instructor: George L. Huckaby)
Lesson 6: Building a Curved Crossing
on a Traction Layout - A simple way that works (Instructor:
George L. Huckaby)
Room 3: Electric Railway Vehicle Painting & Lettering
Lesson 1: Color Guide
for Painting Model Pacific Electric Railway Cars (Instructor: Dave
Garcia)
Lesson 2: Recommendation For Painting 3D Printed Models (Instructor: Volkmar Meier)
Room 4: Electric Railway Vehicle Couplers
Lesson 1: Operational
HO Scale Traction Couplers (Instructor: Southern California
Traction Club)
Room 5: Repowering and Rewiring
Lesson 1: Repowering with
A-Line Components (Instructor: Joe Delia)
Lesson 2: Rewiring for Overhead Wire Operation (Instructor: George Huckaby)
Lesson 3: Digital Command Control for Trolleys (Instructors: George Huckaby & John McWhirter)
Lesson 4: Improving the Lighting and Performance in the Bachmann HO Scale Peter Witt (Instructor: Charles Long)
Lesson 5: Upgrading the Bowser San Francisco F-line "Souvenir" PCC models (Instructor: George L. Huckaby)
Lesson 6: Recommendation For Cleaning 3D Printed Models (Instructor: Volkmar Meier)
Room 6: Modeling Tips
Lesson 1: Improving the
Turning Radius of the 1999 Bowser Trolley Power Unit (Instructor:
George L. Huckaby)
Lesson 2: A Short List of
Model Interurban Freight Cars (Instructor: George Jones)
Lesson 3: Paving Streets (Part One) (Instructor: Charles Hepperle & George L. Huckaby)
Lesson 4: Paving Streets (Part Two) (Instructor: Charles Hepperle & George L. Huckaby)
Lesson 5: More Model Interurban Freight Cars (Instructor: George Jones)
Lesson 6: Enhancing Performance of the HO scale Bachmann Peter Witt (Instructor: Bob Dietrich)
Lesson 7: Replacing the Trolley Pole on the HO scale Bachmann Peter Witt (Instructor: John McWhirter)
Room 7: Traction Models
Lesson 1: Model
Tramway & Fairfield Traction HO scale Traction Models (Instructor: George L. Huckaby)
Lesson 2: HO
Scale Los Angeles Railway (LARy) Models" (Instructors: Fred
Gurzeler & Eric Bracher)
Lesson 3: Hartland "Sparky" Locomotive Kit-bash Project - Part One (Instructor:
Karl Johnson)
Lesson 4: The HO scale 3D Printed Siemens S70 Ultrashort LRV Model (Instructors: Volkmar Meier & George Huckaby)
Lesson 4-1: Part 1 - Assembling the Three S70 Floors (Instructor: Volkmar Meier)
Lesson 4-2: Part 2 - Mounting the Car Bodies(Instructor: Volkmar Meier)
Submission Information.
Make all submissions electronically via email to:
Trolleyville Schoolhouse
P.O. Box 641175
West Los Angeles, CA 90064-1175
We prefer articles composed in Microsoft Word and submitted via E-mail to schoolhouse@customtraxx.com.
Page last updated: August 17, 2017